Better strength.
The best IP protection (IP-55).
Modularity for internal assembly. Doesn’t require more pre-engineering at customer
end.
Punched holes having pitch of 12.5mm.
Depth-adjustable mounting of component plate and transformer / choke channels on a
25mm pitch. Which rests on member of frame structure and thus load is transferred to
base. Mounting nut bolts are used only to hold it vertically.
Fire retardant & chemical resistant Polyurethane foamed D type gaskets (workability at
100ºC temperature) on doors and covers for better IP protection.
Stronger support channels (plated or powder coated) screwed on the doors.
Universal mounting of doors and covers so that they can be interchanged or reverted,
Structure (skeleton) of the enclosure also can be reverted.
Clamped and folded gland plates in parts for easy removing and fitting. Gland holesnot
necessary to decide earlier, can be drilled at site also.
Sheet metal folded base looks attractive with ease in grouting (Grouting holes
visible). Removable base covers are also in 3.00 thk. Push the enclosure on round pipe
widthwise or depth wise.
Detachable all the doors and covers facilitates faster interior assembly.
4 point locking arrangement with rotating centralized lockable handle by lever key
torestrict unauthorized access (option of 2 bit key operated lock).
Eye bolts are fitted in depth angles used for component plate mounting which are
firmly welded to its body from front to back. Thus the mainly load is transferred to
lifting hooks directly and notthrough panel body.